Coactive Aesthetics ROUTER-LL, Руководство пользователя

Страница: 15 / 30

14
Operation
The following sections describe the basic features of the ROUTER-LL.
Setup Screen
The
SETUP
screen allows you to configure your ROUTER-LL. While in
the
SETUP
screen, no connections to other ROUTER-LLs are allowed. The
SETUP
screen is enabled by pressing
<S>
and then
<Y>
from the
IP
ADDRESS CONFIGURATION
or
CONNECTIONS
screen.
While in the
SETUP
screen, use the
<RETURN>
key to edit a field and the
<TAB>
key to move from field to field. While entering text in a field, the
<RETURN>
key will accept the new text and the
<ESC>
key will return the
field to it’s previous value.
The following parameters can be configured:
•
Mode
: This parameter sets the ROUTER-LL to be either a
CLIENT
or a
SERVER
. There should be exactly one
SERVER
in each group of
ROUTER-LLs that will talk to each other. All other ROUTER-LLs
should be configured as
CLIENT
s.
•
Transceiver Type
: This parameter indicates which Ethernet port
on the ROUTER-LL will be active. The choices for this field are
10BASE-T
and
10BASE2
.
•
IP Address
: This is the IP address of the ROUTER-LL on the IP net-
work. This addresses should be obtained from your System Adminis-
trator.
•
Subnet Mask
: This is the IP subnet mask of the ROUTER-LL on the
IP network. This mask should be obtained from your System Admin-
istrator.
•
Gateway Address
: This is the IP address of the default gateway for
the ROUTER-LL on the IP network. This address should be obtained
from your System Administrator.
•
Server Address
: This is the IP address of the ROUTER-LL
SERVER
. This field is only available if the
Mode
field is set to
CLIENT
.
The save any changes made to the ROUTER-LL in the
SETUP
screen,
press
<S>
. To restore the previous configuration, press
<ESC>
. In either
case, the ROUTER-LL will return to the
IP ADDRESS CONFIGURATION
or
CONNECTIONS
screen.