Coachmen RV Viking, Руководство пользователя

Страница: 12 / 32

12
top mounting plate is secure in opposing channel located
on roof sideboard.
5. Attach front and rear tent sections to door frame using
Velcro provided.
6. Check door for smooth operation. Adjustments at top or
re-leveling the unit may be necessary.
7. Reverse steps 1-6 to uninstall.
ROLL OUT ASSEMBLY OPERATION
(ROLL OUT MODELS ONLY)
1. From exterior of camper release roll out latch by turning
handle and pulling outward on roll out.
2. Pull outward on roll out until it stops.
3. Check to make sure roll out latches located inside at floor
level are engaged in the locked position. (Pushing outward
from inside the unit at floor level may be necessary to fully
engage latches).
4. Locate roll out tension rafter and install in the same
manner as bed end installation.
5. Secure roll out tent side by attaching Velcro at all points
inside and outside.
Reverse steps 1-5 for unit take down.

!
WARNING!
During set-up and take down procedure make sure
all tent materials are clear of any moving parts to
prevent tent damage. I.E. (Lifter arms, bed platform
slides and roll out box).