19
EN
GL
IS
H
Storage
1. Clean the exterior of the grass trimmer.
2. Transfer any fuel remaining in the fuel tank to a petrol container.
3. Start the engine when the fuel tank has been emptied.
4. Allow the engine to idle until it cuts out to empty the carburettor of fuel.
5. Allow the engine to cool for 5 minutes.
6. Use a spark plug socket to remove the spark plug.
7. Pour one teaspoon of pure 2-stroke oil into the cylinder via the spark plug hole,
pull the starter handle slowly a few times to distribute the oil evenly over the inside
of the engine. Replace the spark plug.
8. Store the grass trimmer in a dry and well ventilated place.
Using the trimmer after storage
1. Use a spark plug socket to remove the spark plug.
2. Pull the starter handle quickly and smoothly a few times to remove the surplus oil
from the cylinder.
3. Clean the spark plug electrodes or replace the spark plug with one having
the correct plug gap.
4. Tighten the spark plug using a spark plug socket.
5. Fill the fuel tank.
6. Follow the instructions in the
Starting a cold engine
section.