CO/Tech DM-160B, Оригинальное руководство пользователя

Страница: 9 / 40

9
EN
GL
IS
H
Care and maintenance
• Always keep the motor’s ventilation openings free of dust and debris.
• Clean the machine as needed using a lightly moistened cloth and mild detergent
if necessary.
• Avoid using solvents and abrasive cleaning agents.
Troubleshooting guide
Problem Possible cause Possible solution
The machine
does not start. • No power.
• Short circuit
• Faulty power switch. • Check to see if there is power at
the wall socket.
• Contact our Customer Service
Dept in case of motor or
electrical faults.
• Contact our Customer Service
Dept in case of motor or
electrical faults.
The machine
runs slowly. • Worn/damaged
accessory.
• Speed too low.
• The motor is overheated.
• Sharpen or change
the accessory.
• Alter the variable setting.
• Do not press down too hard.
Strange noise. • Mechanical fault.
• Faulty windings. • Contact our Customer Services.
• Contact our Customer Services.
Heavy vibration. • Loose accessory. • Tighten the tool and make sure
it is set correctly.
Sparks in
the motor. • Winding short circuited.
• Dirty commutator. • Contact our Customer Services.
• Contact our Customer Services.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Power supply
230 V AC, 50 Hz
Power 160 W
No-load speed 8 000–35 000 rpm
Collet size 2.4 and 3.2 mm
Sound pressure (LpA) 73 dB(A) (Uncertainty KpA: 3 dB)
Sound power (LwA) 84 dB(A) (Uncertainty KwA: 3 dB)
Vibration value 3.74 m/s² (Uncertainty K: 1.5 m/s²)