6
EN
GL
IS
H
Installation
Upper and lower handle assemblies
1. Unscrew the 4 large plastic nuts, washers and bolts from the lower handle.
2. Raise the upper handle assembly and align it with the lower handle assembly.
3. Screw together the assemblies.
Chute direction crank
The crank comes in two parts and is bolted together with the included sleeve.
1. Thread the two ends into the sleeve.
2. Align the ends’ bolt holes with the ones in the sleeve and assemble.
3. Securely fit the locking
nuts into place but do not
over tighten.
4. Fasten the crank’s support
bracket into the upper handle
assembly’s left side by threading
it into the hole. Tighten the nuts
and washers.
5. Thread the crank into the bottom
bracket and fasten it using
the split pin.
Mounting the discharge chute
1. Remove the retaining bolt at the bottom of the chute’s base.
2. Insert the chute into its base.
3. Re-insert the retaining bolt and
tighten the nut securely.
Содержание DB7655
Страница 2: ...2...
