13
ENGL
IS
H
Fan Mode
1. Plug the mains lead into a wall socket.
2. Switch the air conditioner on.
3. Press [ MODE ] until the “Fan” indicator lights up.
Note:
The temperature cannot be set when the fan mode is activated.
Set the desired fan speed using the remote control. The display shows the present room temperature.
Note:
For maximum efficiency:
• Make sure that no furniture or other objects are obstructing airflow.
• Close curtains/blinds during the warmest hours of the day.
• Make sure that the air filters are clean.
• Keep windows and doors closed.
Timer function
Timer on
1. Plug the mains lead into a wall socket.
2. Point the remote control at the air conditioner and press [ TIMER ON ] repeatedly to set the time delay before the air
conditioner switches on automatically (0.5–24 hours). A few seconds after the desired time has been set the air
conditioner will beep to indicate that the setting has been made. “Timer On” will appear on the display of the remote
control and a green dot will shine in the bottom right-hand corner of the display on the main unit.
3. To cancel the set timer function, press [ ON/OFF ] on the remote control. The green dot in the bottom right-hand corner
of the main unit will go out and “Timer On” will disappear from the display of the remote control.
Timer off
1. Plug the mains lead into a wall socket.
2. Switch the air conditioner on.
3. Point the remote control at the air conditioner and press [ TIMER OFF ] repeatedly to set the time delay before the air
conditioner switches off automatically (0.5–24 hours). A few seconds after the desired time has been set the air
conditioner will beep to indicate that the setting has been made. “Timer Off” will appear on the display of the remote
control and a green dot will shine in the bottom right-hand corner of the display on the main unit.
Timer setting examples using the remote
Setting the air conditioner to
start
in 6 hours
1. Press [ TIMER ON ]. The remote control will display “Timer On”, the most current TIMER ON setting and the “h” (hour) symbol.
2. Press [ TIMER ON ] the required number of times until “6.0h” is displayed on the remote control. This information will then
be sent to the air conditioner.
3. After a few seconds the remote control will revert back to showing the current set temperature.
4. The start function is now activated and the air conditioner is now programmed to start in 6 hours.
Setting the air conditioner to
stop
in 10 hours
1. Press [ TIMER OFF ]. The remote control will display “Timer Off”, the most current TIMER OFF setting and the “h” (hour) symbol.
2. Press [ TIMER OFF ] the required number of times until “10h” is displayed on the remote control. This information will
then be sent to the air conditioner.
3. After a few seconds the remote control will revert back to showing the current set temperature.
4. The stop function is now activated and the air conditioner is now programmed to stop in 10 hours.
Setting the air conditioner to
stop
in 2 hours and
restart
after 10 hours
1. Press [ TIMER OFF ].
2. Press [ TIMER OFF ] the required number of times until “2.0h” is displayed on the remote control.
3. Press [ TIMER ON ].
4. Press [ TIMER ON ] the required number of times until “10h” is displayed on the remote control.
5. The air conditioner is now programmed to stop in 2 hours and restart in 10 hours.