cnsat Smart Antenna Selector Скачать руководство пользователя

Страница: 4 / 14

Chapter 2 - Windows PC Application

2.1 – First Access

This GUI is the most complete way to manage and/or use the functions of the Smart Antenna
Selector.

The “brain” behind all the processes is a Crestron DIN-AP3 automation processor which carry
onboard a GUI made by the Crestron Xpanel technology.

This GUI allow you to:



Select the target IP addresses of both antennas ACU/TV Hub, to allow the processor to link
them and decode the data stream incoming.



Configure the azimuth limits of both antennas, or better to set the “blind” sector.



Select the antennas models.



Configure the IP address, netmask and default gateway of the S.A.S. Itself



Select the operation mode, or better SMART (manual or automatic) and DIRECT.

The first installation is quite simple.

The S.A.S. is configured to have a default IP address of: 192.168.1.100

Open the folder with the Windows PC application inside (is an .exe file). The following page will
appear:

4 This means that the IP address of both ACUs/TV Hub has to be set before configuring the Smart Antenna Selector

target IP addresses.

5 The Smart Antenna Selector is available only for antennas with TCP/IP link, so the G and M series cannot be linked

Содержание Smart Antenna Selector















Результаты поиска

Содержание Smart Antenna Selector

Отзывы:

Похожие инструкции для Smart Antenna Selector

Бренды по названию

Популярные бренды

cnsat Smart Antenna Selector, Инструкция по эксплуатации

Результаты поиска

Содержание Smart Antenna Selector

Отзывы:

Похожие инструкции для Smart Antenna Selector

Бренды по названию

Популярные бренды