SSID
: Specify the name of a wireless network. All points in the
same wireless network must have the same SSID.
Channel Number
: Select the appropriate channel in which all
wireless devices broadcast in the same wireless network.
Enable Mac Clone
: In
Client
mode, select this option to copy
the MAC address of a computer. All packets transmitted
wirelessly will use this MAC address. This is for added security.
Click
Finished
to complete the wizard setup. The wireless
router will reboot to make the changes take effect.
If you have changed the LAN IP address of the wireless router
in
Step 7
, you need to use the new IP address to access the
wireless router again.
10. Test your Internet connection. From any connected computer,
open a web browser and enter
For advanced setup information, refer to the
User’s Guide.
Troubleshooting
1. None of the LEDs turn on when I connect the power.
•
Make sure the power source is turned on.
•
Use only the included power adapter. Using a different power
adapter will damage the wireless router.
2. I cannot connect to the wireless router.
•
Make sure the wireless router is turned on.
•
Check the cable connections. An Ethernet connection should
not be longer than 100 meters.
•
Make sure the IP addresses of your computer and the
wireless router are in the same range. Set your computer to
receive an IP address from the wireless router (refer to
Section B
or the User’s Guide).
3. I cannot connect to the Internet through the wireless router.
•
Make sure the modem is turned on.
9
