CNET CNP-102U, Руководство пользователя

Страница: 68 / 80

check the cable connection. If the pins are damaged, contact your dealer for a replacement
connector.
Windows 95/98/Me/NT/2000/XP/2003 Troubleshooting
Multi-Segment LAN Environment Installation (through the Network Print Port)
If your print server and Windows 95/98/Me/NT/2000/XP/2003 are located on two different
segments, and your Windows NT server is used as the router/gateway you will need to
implement the following procedures in order for your print server to function properly:
Add the RIP for NWLink IPX/SPX compatible transport. See RIP for NWLink IPX/SPX
compatible transport Installation Procedure later in this section.
Add the frame type 802.2 for both Ethernet adapters. See Multi-Segment Frame Type
802.2 Installation later in this section.
RIP for NWLink IPX/SPX compatible transport Installation Procedure
1. From your Windows NT server that is used as a router, select Start from the bottom left
hand corner of the screen.
2. Select Settings .
3. Select Control Panel .
4. Double-click the Network icon.
5. Select Services .
6. Select Add .
7. In the Select Network Service box, select the RIP for NWLink IPX/SPX compatible
transport . Click OK .
8. Follows the directions on the screen.
9. Done.
Multi-Segment Frame Type 802.2 Installation
1. From your Windows NT server that is used as a router, select Start from the bottom left
hand corner of the screen.
2. Point to Settings , and select Control Panel .
3. Double-click the Network icon.
4. Select Protocols .Select the NWLink IPX/SPX Compatible Transport .
5. Select Properties .
6. Select your (first) network interface card and select Manual Frame Type Detection .
7. Click Add .
8. In the Frame Type field, select Ethernet 802.2 .
9. In the Network Number field, type in an unique 8-digit hexadecimal network number.
For example: 12345ABC.
10. Select Add .
11. Repeat the Steps 8-12 for the other Ethernet adapter.
12.
Restart the computer .
13. Done.
68