Motion Detection Alerts
The
Motion Detection
feature can generate an Alert when motion is detected.
The Network Camera will compare consecutive frames to detect changes caused by the
movement of large objects.
But the motion detector can also be triggered by:
•
Sudden changes in the level of available light
•
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there
is good steady illumination, and the camera is mounted securely. It cannot be used outdoors
due to the sensitivity of the CMOS sensor.
To Use Motion Detection Alerts
Using the Web-based interface on the Network Camera, select the
Motion Detection
screen,
then configure this screen as described below.
Figure 22: Motion Detection
1. Enable
the
Motion Detection
feature.
2. Set the area or areas of the video image to be examined for movement. You can define up
to 4 areas, and set the motion threshold individually for each area.
3. If using a schedule, define the desired schedule in
Event Trigger
screen.
4. Save your changes.
5. Select
the
screen to have alerts sent by E-mail:
•
Enable and enter at least one (1) E-mail address
•
Select or enter the desired options for
Video
Attachment
,
Show
"
From" as
and
Subject
fields.
•
Enter details of the SMTP Server used to send the E-mail.
26
