CNC RAPTOR XPR, Руководство пользователя

Страница: 26 / 53

26
AUTO vs SIMULATION Mode
AUTO vs JOG Mode
Auto Mode
Simulation Mode
Simulation Mode
Auto Exclusive Operations Jog Exclusive Operations*
Each operation in Auto Mode contains a sequence of instructions for different parts.
A simulation of the Auto function. If you click on Simulation while the machine is performing an operation on Auto
mode, it will pause that operation. You may then use the MPG remote to manually go forward or go in reverse for
that operation’s sequence, one movement at a time.
Think of Simulation Mode as pausing a video, and then moving the slider left or right to rewind or fastforward the
clip one frame at a time.
Lets you control different parts independently, manually. If you just want to control the Unloading arm movement,
switch to Jog Mode.
Buttons of individual parts can only be activated when in Jog Mode.
*These, however, are activated in Auto mode if they are
part of an automatic sequence.
The following are operations that work only
in Auto Mode:
• Material Alignment [requires upgrade]
• Resurface Spoilboard
• Table Clean
• Auto Tool Measure
The following are operations that work only in
Jog Mode:
• Spindle warm up
• Drill Cylinder [requires upgrade]
• Drill On [requires upgrade]
• Spindle Forward
• Block Offset [requires upgrade]
IN THE UTILITIES PAGE
IN THE ADVANCED PAGE
Example: [Auto] Unloading instructs the router to:
• Turn off the vacuum flow
• Travel to the end of the material
• Start the unloading table
• Drop the unloading arm
• Activate the dust extraction suction
• Push the material towards the unloading table
• Raise the location pins after pushing all materials to the unloading table