1
Front
Back
X' Axis
X Axis
Y Axis / Gantry
1.0in
24.50mm
X Axis Detail
End of Y Axis
Slide the gantry onto the t-nuts in the support plate,
starting at the end of the gantry opposite the motor
mount. Position the gantry so that it is positioned as shown
in the detail below.
After the gantry is positioned, tighten the remaining screws
on the back plate to secure the gantry. Use the access
holes in the riser extrusion to tighten the outer button
heads.
Parts Added:
Step 7: Gantry Installation
#
PART
QTY
1
CRP630-00 - Ballscrew Y Axis
1
Updated 10/26/2015
SHEET 8 of 14
