3
5
4
2
1
5
4
3
Atach the extrusion segments to the gantry back plate. To
do this, first slide the button head screws and t-nuts into the
extrusion, place the extrusion against the steel plate, and
thread the button head screws through the approprate
holes, then fasten the extrusion using the socket head cap
screws and t-nuts. Using the access holes in the extrusion,
tighten the button head screws.
Loosely attach the remaining fasteners to the back plate.
The riser extrusion features two access holes for tightening
the button head screws. The extrusion must be oriented as
shown for proper installation.
Parts Added:
Step 5: Gantry Support Assy.
Fasteners in bag: CRP620-00-FAST
Access Holes
#
PART
QTY
1
TNR-M8, Roll in M8 T-nut
32
2
SK-M8-16 - M8 x 16mm Socket Head Cap Screw
28
3
CRP630-01 - Benchtop Pro Gantry Back Plate
1
4
BHCS-M8-20 - M8 X 20mm Button Head Cap Screw
4
5 4080-200-BTPRO - 200mm 4080 Extrusion w/ 2xM8 Holes 2
Updated 10/26/2015
SHEET 6 of 14
