CNA Group CATA Purifyer DREAM, Инструкции по установке, использованию и обслуживанию

Страница: 54 / 144

54
The appliance has not
automatically connected to the
application or the external device,
although the Bluetooth icon on the
appliance is on.
• Check that the Bluetooth of the mobile device is on.
• See how to pair a new device in the USING THE
APPLIANCE section.
It absolutely will not switch on. • Make sure the plug is fully inserted into the socket.
• Make sure the power supply cable is correctly
connected to the appliance.
• Make sure there has not been a power cut. Check
whether lights and other appliances are working.
The appliance vibrates and/or
sounds like it is malfunctioning.
• Check that the purifier is on a flat, even surface.
• Check that the air inlet and outlet are not obstructed
by an object.
The appliance is making too much
noise.
• You can use the SILENT MODE.
The plug and the socket are too
hot.
• Make sure the plug is fully inserted into the socket.
The appliance is emitting a strange
smell.
• The first few times you use the appliance it may
smell of plastic. It will disappear over time with
usage.
• If the appliance smells of burning, contact the
authorised technical service.
• Clean the air inlets and outlets.
• Clean the pre-filter.
The power of the fan is low. The
unit does not purify the air.
• Check whether a filter change indicator has been
activated. If so, carry out the corresponding
maintenance work.
The appliance still indicates that
filter maintenance is required after
it has been performed.
• Try to validate the end of maintenance with the
controls (see the Maintenance section).
The engine takes a few seconds to
start in the chosen mode.
• This is completely normal and is designed to extend
the life of the engine by accelerating gently and to
increase acoustic comfort.