General
- 1 -
1. General
1.1. Safety precautions
Only connect to mains power supply (230 Volt/50 Hz).
Do not place the device in close proximity of water (e.g.
sink, wash basin, etc.). The device can fall into the water
and cause a short circuit.
The device consumes some power during standby
operation. For zero power consumption disconnect from
mains power supply.
Place the device on a stable surface to prevent it from
tipping over and causing damages or injuries.
Condensation can form if the device is placed in cold
surroundings. Leave the device for at least one hour in
standby mode.
Do not subject the device to direct sunlight or high
temperatures, this can result in fire.
1.2. Disposal of Waste Electronic Equipment
Your product is manufactured from high quality raw materials
and should be recycled.
