13
AVAILABLE ACCESSORIES
Wireless Remote
55-0105*
(*Ask for required special adaptor wire P/N 99-0045 pictured below)
Control your motor lift from anywhere within the boat without the hassle of tripping over wires. 50ft
operating range. Powered from a standard A23 - 12V battery. Can be used on any Panther Trim and
Tilt unit or any product that has a two prong molded connector. Enhance the performance of your
Panther Products and especially the 55-0045 Motor Lift by going wireless.
WARNING: Never operate the wireless remote from outside the boat.
Wireless Installation:
(see picture on Page 14)
1)
Remove rocker switch assembly (leave the pump relay harness attached to pump).
2)
Locate adapter cord. It is the two wire red/black cable with the two prong molded
connector on one end and two bullet connectors on the opposite end.
3)
Plug the two prong molded connector into cord coming directly from wireless receiver unit.
4)
Attach the other end of the adaptor cord to the pump relay harness cable. The red wire
from the wireless receiver unit plugs into the green wire of the pump relay harness. The
black wire from the wireless receiver plugs into the blue wire on the pump harness relay.
5)
Attach the red ring terminal to the (+) Positive post on the 12V Boat Battery.
6)
Attach the black ring terminal to the (
–
) Negative post on the 12V Boat Battery.
