CMP DEL UV SPA, Инструкции по установке и руководство по эксплуатации товара

Страница: 7 / 12

7
6. Maintenance
WARNING
Before performing any maintenance on the DEL UV Spa,
make sure the spa is shut down.
6A. UV Lamp Removal (see Figure 3)
For maximum UV sanitizing, replace the UV lamp every 18 months,
even if the lamp continues to shine light.
i. Make sure the unit is disconnected from power and the lamp
has cooled before starting maintenance.
ii. Open the DEL UV Spa by removing the two front screws and
loosening the two enclosure screws on the upper enclosure
assembly. Pull the cover from the enclosure base.
iii. Disconnect the lamp connector attached to the lamp wires.
iv. Gently pull on the lamp wires until the top of the UV lamp is
out of the lamp retainer. Grasp the white ceramic end of the
UV lamp and pull until it is fully removed. Gently twisting the
lamp may facilitate removal. If the UV lamp will be reused,
AVOID TOUCHING THE UV LAMP GLASS WITH YOUR BARE
HANDS. Handle the lamp carefully and set aside. If discarding,
dispose of properly (see the following note).
NOTICE
UV Lamp CONTAINS MERCURY. Manage in accordance
with disposal laws. See www.lamprecycle.org .
6B. Installing the UV Lamp
i. Make sure to handle the new lamp by the ceramic endcaps. Be
careful not to touch the UV lamp. If necessary, wipe off the UV
lamp with alcohol and a lint free cloth before installing.
ii. Slowly place the UV lamp into the lamp retainer until the top
of the UV lamp is pushed past the tabs on the lamp retainer.
iii. Connect the lamp connector to its corresponding part in the
ballast assembly.
6C. UV Reactor Service and Maintenance
The UV lamp is housed in a quartz tube. If the quartz tube becomes
dirty, its ability to transmit rays from the UV lamp will be diminished
and decrease system performance. The quartz tube should be
removed from the UV reactor at least once a year or during a routine
spa water change for inspection and cleaning. More frequent cleaning
may be necessary depending on water conditions.
SECTION 2 Maintenance Instructions