6
4. Electrical
a. Verify that there is no power to the spa and connect the DEL UV
Spa cord to the mating connector(s) on the spa controller.
b. Where possible, route the DEL UV Spa power cord away from other
electrical lines. Avoid routing the power cord parallel to any low-
voltage signal wires.
c. Use a minimum 8 AWG solid copper conductor to connect the
bonding lug provided on the enclosure base to the spa equipment
ground.
5. Operation
When installed correctly, the DEL UV Spa will turn on and off as
required by the spa controller.
Sealing Ring
Lamp Retainer
Quartz Tube
UV Lamp
Retainer Screw
SECTION 1 Installation Instructions
Figure 3: DEL UV® Spa Exploded View
Содержание DEL UV SPA
Страница 11: ...11 NOTES...
Страница 12: ...CMP LLC 36 HERRING ROAD NEWNAN GA 30265 WWW C M P COM DEL 4 2769 01 Rev B_0921ab...