AN241
www.hoperf.com
Copyright © By HOPERF
V0.4 | Page 9/41
No.
Function
Description
8. Coding Format
（
Coding format selection
）
9. CRC Select
（
CRC verification mode selection
）
10. Freq Space
（
Frequency offset interval setting
）
11. Freq Channel
（
Frequency channel signal setting
）
12. DC-DC Select
（
DC-DC mode selectio
）
13. Gaussian Select
（
Gaussian mode selection
）
3
Corresponding key
function area
5 buttons shown in this area with corresponding key of K1-K5
：
it is corresponding to K1
，
indicates that CMT2310A EB will enter the
working state according to the parameters/modes set in the above menus
as short pressed
；
：
it is corresponding to K2
，
indicates that CMT2310A EB returns to
upper level menu directory as short pressed
；
：
it is corresponding to K3
，
indicates that CMT2310A EB selects the
next choice as short pressed
；
：
it is corresponding to K4, indicates that CMT2310A EB selects the
previous choice as short pressed
；
：
it is corresponding to K5
，
indicates that the current selection is
selected as short pressed
；
Operation description in main menu interface
：
1. Press K3 ( ) and K4 (
) to select the required modified item and the flash submenu item indicates
the current selected status.
2. Press K5
（
）
to enter the selected submenu item and select the corresponding subitem
parameter/mode
3. Press K1 ( ) to enter the corresponding working mode according to the current settings.
4. Press K2
（
）
to return to the upper-level menu. Since the current menu is already the upper-level
menu and cannot be returned, it will show no response on the interface.
2.3 Modulation Submenu
Select
1 Modulation
, and press K5 to enter the submenu, as shown in Figure 2-4 below.
CM T2 31 0A EB GU I
1 Mod ul a ti o n
2F SK
1. Rolling option area
