AN241
www.hoperf.com
Copyright © By HOPERF
V0.4 | Page 8/41
not found CMT2310A
Figure 2-2. Startup Interface
（
not inserted CMT2310A-EM
）
2.2 Main Menu
After the screen is powered on for about 1 second, the screen will switch to the normal menu mode, as shown
in Figure 2-3 below. (If the CMT2310A-EM is not inserted properly or the CMT2310A chip cannot be identified,
the screen will remain in the display state as shown in Figure 2-2 until CMT2310A-EM is inserted properly or
CMT2310A can be recognized normally.)
CM T2 31 0A EB GU I
1 Mod ul a ti o n
2 Wo rk M od e
3 Fre que ncr y B and
4 Dat a R ate
2. Submenu selection
area
1. Title
3. Corresponding
key function area
Figure 2-3. Main Menu Interface
No.
Function
Description
1
Title area
CMT2310A EB GUI
2
Submenu selection area
13 submenu selections are shown in the area
1. Modulation
（
Modulation and demodulation mode selection
）
2. Work Mode
（
Working mode selection
）
3. Frequencry Band
（
Frequency band selection
）
4. Data Rate
（
Rate/frequency offset parameter selection
）
5. Tx Output Power
（
Transmission power selection
）
6. Preamble Length
（
Preamble length selection
）
7. Packet Length
（
Packet length selection
）
