AN103
Rev 1.0 | Page 7 / 23
www.cmostek.com
Figure 3. Configuration Setups
Follow the step-by-step instructions to start working in the Configuration Scheme.
1. Setup the configuration scheme as Figure 3.
2. Install the USB Programmer driver. The driver will be installed automatically on the computer. It should be
noticed that if the RFPDK is already installed on the computer, make sure that the RFPDK is not running
when the user is installing the USB Programmer driver.
3. Install the RFPDK to the computer. Refer to Section 7.1 for the detail procedure for the installation.
4. Start Configuring CMT2110A/2210A on the RFPDK and the USB Programmer. Once the configuration is
done, the user can use the evaluation modules in the actual RF system.
Please refer to the “Chapter 7. RFPDK” for the RFPDK usage guidelines and refer to the documents “AN102
CMT2110A Configuration Guideline”, “AN108 CMT2210A Configuration Guideline” for more details.
