AN103
Rev 1.0 | Page 5 / 23
www.cmostek.com
RF-EB
General
purpose
evaluation board for the
CMOSTEK RF products. It can be used to evaluate
and demonstrate the main features of CMT2110A,
CMT2201A and other RF products.
CMT2110A-EM
The CMT2110A-EM is the Tx evaluation module.
The user can use it to evaluate the CMT2110A
performance and features.
CMT2210A-EM
The CMT2210A-EM is the Rx evaluation module.
The user can use it to evaluate the CMT2210A
performance and features.
RFPDK
CMOSTEK provides the PC application that allows
the users to configure all the product features to
CMOSTEK NextGenRF
TM
products in the most
intuitional way. The installation pack can be found on
the CDROM of the CMT2110A/2210A One-Way RF
Link Development Kits.
USB Programmer
It transmits data between the EM and the PC via two
interfaces: USB to PC and serial port to EM. The
protocols of the serial port differ for different parts
(chips). The USB programmer automatically
identifies the part on the EM once it is connected,
and then uses the desired protocol to communicate
to the part.
