CML EV9790 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 26

background image

Evaluation Kit for CMX979 (engineering samples)

EV9790



2017 CML Microsystems Plc

26

UM9790/1

CML does not assume any responsibility for the use of any circuitry described.  No IPR or circuit patent licences are implied.  CML reserves the right
at any time without notice  to change the said circuitry and any part of this product  specification.  Evaluation kits and demonstration boards are
supplied for the sole purpose of demonstrating the operation of CML products and are supplied without warranty.  They are intended for use in a
laboratory environment only and are not for re-sale, end-use or incorporation into other equipments.  Operation of these kits and boards outside a
laboratory  environment  is not  permitted within the  European  Community.    All  software/firmware  is supplied  "as is"  and is without  warranty.    It
forms part of the product supplied and is licensed for use only with this product, for the purpose of demonstrating the operation of CML products.
Whilst  all  reasonable  efforts  are  made  to  ensure  that  software/firmware  contained  in  this  product  is  virus  free,  CML  accepts  no  responsibility
whatsoever for any contamination which results from using this product and the onus for checking that the software/firmware is virus free is placed
on the purchaser of this evaluation kit or development board.

www.cmlmicro.com

United Kingdom

tel: +44 (0) 1621 875500 email: [email protected]

[email protected]

Singapore

tel: +65 62888129 email: [email protected]

[email protected]

United States tel: +1 336 744 5050

email: [email protected]

800 638 5577 [email protected]

«
...
24
25
26

Содержание EV9790



























Отзывы:

Нет отзывов

Похожие инструкции для EV9790

Бренд: IEI Technology Страницы: 12

Бренд: IEI Technology Страницы: 190

Бренд: IEI Technology Страницы: 8

Бренд: IEI Technology Страницы: 193

Бренд: IEI Technology Страницы: 182

KINO-DBT Series

Бренд: IEI Technology Страницы: 133

Бренд: AOpen Страницы: 8

Бренд: MSI Страницы: 48

AR0832MBSC25SUFAH-GEVB

Бренд: ON Semiconductor Страницы: 6

A320M-K PRO V14

Бренд: Colorful Страницы: 12

Бренд: ASROCK Страницы: 56

Бренд: Supermicro Страницы: 97

Бренд: JETWAY Страницы: 46

Бренд: Intel Страницы: 87

Бренд: MSI Страницы: 77

Бренд: JETWAY Страницы: 60

Бренд: DFI Страницы: 47

LanParty NFII Ultra B

Бренд: DFI Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды