CMF Power Select, Инструкция по установке и эксплуатации, Страница: 20 / 40

Installation / Operation Instructions
CMF Power Select Ver. 3.0
REV 6.3
19
5.6.4 Changing the HMI network parameters
In order to modify the HMI network parameters, the user must login as
“MANAGER” to the HMI. This process is described in section 4.1.1. After logging
in, from the “Home” screen of the HMI, touch the CMF logo at the bottom of the
screen to enter the “Menu” screen. Touch the “Network Settings” button. To
modify the local network settings for the HMI, touch the “This HMI Network
Settings” button. To modify which unit/s that this HMI can communicate with,
touch the “Equipment To Control” button.
If you changed the IP address of the
PLC, you have to update this parameter in the HMI in order to establish
communication to the new PLC address.
Note: You cannot change the actual
IP address of the PLC from the HMI. This must be done within the PLC web
interface as outlined in section 5.6.3, or with a script on an SD card.