English
Hand pallet truck INOX
Type 040005740
Hand pallet truck GALINOX
Type 034527170
F 08.01.115/007
Technische Änderungen vorbehalten
Design changes under reserve
Sous réserve de modifications techniques !
7 / 16
Safety instructions
Operation, assembly and maintenance only by: Instructed, qualified operators
(Definition of qualified operators in accordance with IEC 364) Qualified operators are persons who, on the basis of
their training, experience, instruction and knowledge of the relevant standards and regulations, regulations for prevention
of accidents and operating conditions, are authorised by the persons responsible for the safety of the plant to carry out the
respective required tasks whilst being able to recognise and prevent potential associated dangers.
Operation is only permitted on a level and firm floor/ground surface.
Transporting of persons and a presence within the danger zone is not permitted.
A presence under a raised load is not permitted.
The specified load capacity must not be exceeded.
The loaded material must be distributed evenly on the fork.
The pallet truck must never be loaded whilst the fork is in a raised position.
The high-lift pallet truck is not made for or capable of off-loading like a fork lift truck or crane.
Never leave the load unattended in a raised position.
Never reach into moving parts.
Defects are to be dealt with competently as soon as they become apparent.
Only use genuine spare parts.
Inspections
In accordance with Section 37 of the BVG D27 the pallet truck must be inspected by a competent
technical expert at least once per year, and otherwise as required.
We recommend that you record the results of the inspections in an inspection book.
Operating instructions
Functional description
The pallet truck is a manually-operated hydraulic device.
The load is lifted by manipulating the pump lever.
Easy manoeuvrability due to steering rollers of Polyamid.
The load is lifted by manipulating the pump lever (tie bar)
lowering
Lowering position
driving
Driving position
lifting
Lifting position
pump movement
The control lever in the handle can be set to three different positions
DRIVING / NEUTRAL – driving position
LIFTING – lifting position
LOWERING – lowering position
