MAN.234 Rev.3 ENG - Use and maintenance manual S19HD (PRO)
page
65
of
83
For repairs and maintenance of your plat-
form, exclusively contact:
Service
C.M.C. s.r.l.
Via Bitritto, 119
70124 BARI – ITALY
Tel.
+39 080 5326606
+39 080 5326557
Fax:
+39 080 5368541
E-mail: [email protected]
IMPORTANT
FOR ANY COMMUNICATION, PROVIDE THE TYPE AND SERIAL
NUMBER OF THE MACHINE.
Any operation requiring interventions on the components of
the machine shall be carried out by authorized and trained staff.
Non-authorized staff can’t replace components.
Many compo-
nents of the MEWP have been calibrated: a correct calibration of
these parts (which is possible only in C.M.C. or in authorized work-
shops) is necessary to ensure the safety of the machine.
8.15.1
Remote Connection System (*optional)
The remote connection system is composed of an electronic box (Picture
90) mounted on the chassis box.
Picture 90: remote connection system.
Following the remote connection procedure:
1. Ensure that the M12 socket on the remote connection box is cor-
rectly connected to the M12 plug of the electric box mounted on
the chassis;
2. Share your internet wireless network with the remote connection
device in free mode (without password);
3. Lift the connection remote switch
L
on the switching on/off box
(Picture 91):
www.
duma
-rent.com
