Club Car Tempo Walk, Руководство пользователя

Страница: 31 / 43

30
CHARGER POWER CORD
⚠
WARNING
●
Install surge arrestors on incoming power lines. Surge arresters will help protect electrical
components in the charger and on the unit from all but direct or close lightning strikes.
⚠
WARNING
●
Two NOCO G7200 chargers can share the same GFCI outlet. A normal 110-120 VAC, 50-
60Hz outlet is sufficient (US). The charging current is 3.6A per charger. Ensure that the
outlet has more capacity than the combined charging current of all chargers plugged in.
●
Connect the charger power cord to a properly grounded, three-wire outlet within the
voltage and frequency range shown on the charger.
●
Place all cords so they will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
The power plug must be connected to an appropriate receptacle that is properly installed and grounded in
accordance with the National Electrical Code and all local codes and ordinances.
The use of an extension cord with the charger should be avoided. If one must be used, heed the following
WARNING.
⚠
WARNING
●
An extension cord or electrical outlet must accept a three-prong plug. The extension cord
should be a three-wire No. 12 AWG (American Wire Gauge) or no. 14 (British Standard
Wire Gauge), and be as short as possible (no more than 12 feet (3.7 m). The use of an
improper extension cord could result in fire or an electrical shock.
PLUG AND RECEPTACLE
The charger cord, plug, and receptacle are wear items and should be inspected daily. Visually inspect
them for cracks, loose connections, and frayed wiring; they must be replaced when worn or damaged.
⚠
WARNING
●
If pins are bent, the plug must be replaced immediately. The plug is not serviceable. Do
not attempt to repair the plug or straighten bent pins. Contact your local authorized Club
Car dealer or distributor for repairs.
CHARGER MOUNTING
Use the mounting holes to secure the charger (Figure 14). Position the charger so that is has adequate
ventilation and the charger status indicator panel is visible. The charger can be mounted in multiple
orientations (vertical, horizontal) provided it has adequate ventilation (Figure 15).
To help ensure optimal charge times, mount the charger in an area where ambient temperatures during
charging remain below 104 °F (40 °C).
⚠
WARNING
●
Make sure the charger is securely mounted. Only hang the charger by its designate
mounting holes with provided screws.