Attachments and Buckets
Page 36
2007 Carryall 295 Intellitach and XRT 1550 Intellitach Diesel Vehicle Owner’s Manual
7. Swing the attachment interface cylinder down.
8. Turn the key to the ON position but DO NOT start the engine.
9. Move the joystick (1) forward to extend the attachment arm cylinder
10. Move the joystick (1) to the right to extend the attachment interface cylinder.
11. Turn the key to the OFF position.
NOTE: When aligning the cylinders to the attachment arm and interface during installation, the cylinders
may need to be retracted slightly to relieve the hydraulic pressure. Do not have hands in the area
of the cylinders when extending or retracting the cylinders.
12. Raise the attachment arm (1) and align it with the cylinder (2). Install the pin (3) and retaining ring (4)
13. Raise the attachment interface and align it with the cylinder. Install the pin (2) and the retaining ring (1)
Figure 41 Joystick
Figure 42 Raise Attachment Arm, Install Pin, and
Retainer Ring
Figure 43 Raise Interface, Install Pin and
Retainer Ring
10
28
49
80
1
AUX HYD
FLOAT
ACTIVATE
TOGETHER
FOR FLOAT
1
Содержание IntelliTach Carryall 295
