Club Car Carryall I 2000, Руководство пользователя

Страница: 18 / 44

Driving Instructions
12 2000 Carryall Electric Vehicle Owner’s Manual
• The warning light will not come on if the charge is 90% or more complete. The onboard computer will
retain in memory the amount of charge needed to fully replenish the batteries and will complete the
charge during the next charge cycle.
• When the charger is unplugged, the warning light will illuminate and remain illuminated for 10 seconds if the charge
is less than 90% complete but the vehicle has enough power for approximately 30 minutes of operation. This will
alert the operator that the vehicle may be used, but that it must be charged to completion as soon as possible.
• The warning light will repeatedly illuminate for 10 seconds, with 4 second intervals if the charger times out at 16
hours and the batteries are not sufficiently charged (see PowerDrive Charger Owner’s Manual). This indicates
an abnormal charge cycle. The charger and batteries should be checked by your Club Car distributor/dealer.
• The warning light will repeatedly illuminate for 10 seconds, with 4 second intervals during a charge cycle (DC
plug is still connected) if AC power to the charger is interrupted. The light will go out when AC power is restored.
LED Light: In addition to the warning light, there is an infrared LED in the dash light assembly which trans-
mits an infrared signal from the OBC. This signal is received by the optional Communication Display Module
which provides information on the condition of the vehicle and batteries.
DRIVING INSTRUCTIONS
No one should drive the vehicle without first being instructed in the proper operation and use of the vehicle’s
controls. An experienced operator should accompany each first-time driver on a test drive before allowing
them to operate the vehicle alone.
To ensure safe operation of the vehicle, follow exactly and in order, all of the following procedures. Read and
understand all instructions prior to driving the vehicle.
STARTING THE VEHICLE
1. Be sure load, if any, is secure.
2. Study and understand controls.
3. Be sure everyone is seated and holding onto seat handles or handrails. Driver should have both hands
on the steering wheel.
4. Read safety warnings located above pedals.
5. Make sure wheels are turned in desired direction.
6. Turn key to the ON position and be sure nothing is in your path.
7. Select direction by placing shift handle in desired position (F = forward or R = reverse). A buzzer will
sound as a warning when the vehicle is in REVERSE.
8. Slowly depress accelerator pedal. The park brake will release automatically and the vehicle will start to
move. As the accelerator pedal is depressed, speed will increase until full speed is reached.
• ONLY LICENSED DRIVERS SHOULD BE ALLOWED TO DRIVE THIS VEHICLE.
• BEFORE ALLOWING THE VEHICLE TO BE DRIVEN, MAKE SURE THE DRIVER IS FAMILIAR
WITH ALL CONTROLS AND OPERATING PROCEDURES.
• NO MORE THAN TWO PEOPLE SHOULD BE ON THE VEHICLE AT ONE TIME.
• DO NOT ALLOW RIDERS IN THE CARGO BED.
• THE VEHICLE IS NOT SPECIALLY EQUIPPED FOR HANDICAPPED PERSONS:
- BE SURE ALL PASSENGERS ARE CAPABLE OF SECURING THEMSELVES IN A MOVING
CARRYALL VEHICLE BEFORE ALLOWING THEM TO RIDE IN ONE.
- BE SURE ALL PERSONS CAN PROPERLY OPERATE THE VEHICLE PRIOR TO ALLOWING
THEM TO DRIVE THE VEHICLE.
WARNING CONTINUED ON NEXT PAGE...
WARNING