The CLS DMX 4 Channel Dimmer
The CLS DMX4 dimmer
Specifications:
DMX 512(1990) standard protocol
4x1000W-Total max load: 20A
Noiseless on PA
Mounting in the truss/lightstands etc. together with the lamps
CLS Low-Heat-System
DMX in/out by Neutriks 3-pin XLR
Dip-switch settings for:
512 DMX addresses
Dimmer/switchpack mode
20/16A mode for use of 4x1000W lamps on 16A
Fuses: 4 x 5A(5x20mm) outside mounting
1 x 1A(5x20mm) inside mounting
Power outlets: 4 x EEC contacts
Power input: 1 m rubber cable (3x2,5-N-L-G)
Mounting detail: 8 mm bolt with nuts
Ultra compact only: 19x12x6cm-2kg.
Dip-switches
DMX in/out by Neutriks 3-pin XLR
Power input: 1 m rubber cable
Power outlets
4 x EEC contacts
(3x2,5-N-L-G)
8 mm bolt with nuts
Fuses: 4 x 5A
Mounting detail:
