The CLS DMX 4 Channel Dimmer
How to start:
First of all - You have to find out what power outlet connector you should use for
connecting the CLS DMX4 dimmer to the outlet from the powersource.
The connector depend on how much power the CLS DMX4 dimmer should handle.
230V total power with all 4 channels on full.
10A=2300W
16A=3600W
20A=4600W
This means that you have to count the power of all the lamps that you want to connect
to the CLS DMX4 dimmer.
Ex1: 4xPar56 with CP300=4x300W=1200W total. You need a connector for 10A.
Ex2: 8xPar56(2 on each channel) with CP300=8x300W=2400W total. You need a
connector for 16A.
Ex3: 4xPar64 with CP62=4x1000W=4000W total. Normally you need a connector
for 20A to run all of them on full power. The CLS DMX4 dimmer has a special
function. If you turn on the Dip-switch nr. 10, you will be able to use it on a
16A outlets without any risk of blowing the 16A fuse. See details about Dip-
switch settings.
Important: DO NEVER CONNECT MORE THAN 1000W ON EACH CHANNEL
OUTPUTS, EVEN IF YOU DON'T USE IT ON FULL POWER. THE UNIT
WILL BE DAMAGED !!!
Connection: Blue:N - Brown:L - Green/Yellow:Ground
Important: ALWAYS MAKE ALL THE CONNECTIONS BEFORE CONNECTING
THE POWER !
