CLP UNI 12, Руководство по эксплуатации, Страница: 5 / 9

C E N T E R
CGA /EGA
Signal Connector
Pin 1 CGA analog red input.
Pin 2 CGA analog green input.
Pin 3 CGA analog blue input.
Pin 4
Ground.
Pin 5 V. Sync
Pin 6
H + V Sync or H. Sync
Pin 7 No Connection
Pin 8
Ground
Pin 9 V Sync
Pin 10 H + V Sync or H. Sync
Adjusting the
Image
• Press the menu button to start the OSD feature.
• Click the “Up” or “Down” button to select the function to be adjusted.
• Click the “Menu” button to access into the function to be adjusted.
• Click the “Up” or “Down” button to change the current setting of the function
selected.
• To exit the OSD menu or go back to a previous menu click the “Auto/Esc”
button. Upon exiting the menu your changes will automatically saved.
• If after pressing the menu button, the OSD button will disappear, if no
additional buttons are pressed for several seconds. If this occurs, any
adjustments made, will still be automatically saved.
• Due to the automatic save feature, turning off the power is unwise while
navigating the menu.
1 2 3 4 5 6 7 8 9 10