CLP UNI 12, Руководство по эксплуатации, Страница: 4 / 9

C E N T E R
OSD Control
1. Power Switch Power On/Off.
2. LED Power Indicator
Green = normal
Red = power saving
Off = power off.
3. Menu Automatically optimize positions, phase
and clock when OSD is not shown.
4. Up This control is used for selection or
adjustment when OSD is show.
5. Down This control is used for adjustment
when OSD is shown.
6. Auto/Esc Enter OSD access sub-menu and
selection.
VGA Signal
Connector
Pin 1 Analog red input.
Pin 2 Analog green input.
Pin 3 Analog blue input.
Pin 4 Ground.
Pin 5 Digital ground.
Pin 6 Analog red ground.
Pin 7 Analog green ground.
Pin 8 Analog blue ground.
Pin 9 Ground.
Pin 10
Sync ground.
Pin 11 Ground.
Pin 12 SDA (DDC Data).
Pin 13 H. Sync or H + V Sync.
Pin 14 V. sync.
Pin 15 SCL (DDC CLK).