CLP UNI 12, Руководство по эксплуатации, Страница: 3 / 9

C E N T E R
Setting up your
LCD monitor
• Choose a position where the reflection of the light is minimal and away from a
window for maximizing the quality of the screen image.
• It is important to keep 30cm between the LCD monitor to minimize eye strain.
• Position the LCD monitor slightly above your horizontal vision as you are
sitting.
• Tilt either forward or backward for the most comfortable angle to view the
monitor. This LCD monitor supports connection to a computer or a work
station.
Screen
Adjustment
To enter adjust mode, please refer to the OSD control.
• Turn the computer and LCD monitor on.
• Press “Auto” button to start auto adjust.
• This will start the auto adjust process. This will take approximately 10
seconds. You may notice the image changing and occasionally flashing (this is
normal).
• Your LCD monitor provides a self testing function, through which you can
check whether the LCD monitor functions are working properly.
• If your LCD monitor is properly connected, but there is no image showing and
the indicator lights up in orange, please follow the below steps:
• Shutdown the computer and the LCD monitor.
• Unplug the signal connector from the back of the computer.
• Turn the LCD monitor on.
• If the image connector is disconnected or damaged, a “No signal” sign will
pop up on the monitor.
• Turn off the LCD monitor and reconnect the signal cable, and then turn the
computer and LCD monitor on.
• If the LED of the LCD monitor is an orange colour after completing the steps
above, please check your VGA card and computer system. Your monitor
should be operating properly.