Clover CDR-4770, Инструкция по эксплуатации

Страница: 40 / 90

38
DIGITAL VIDEO RECORDER
OPERATION
Ⅴ
9-4. DISK
!
Stop recording, playback, backup and searching before commencing disk formatting.
@
Select a device by using [-, +] buttons. ( Internal HDD or USB (Front) Memory Stick )
#
Select “START” by using down button [
†
], and press [ENTER] button to start formatting.
$
Formatting will begin, and the progress will be displayed in the status line.
Please note that it takes approximately 10~30 seconds to format a HDD.
%
When formatting is finished, it will display COMPLETE, and SUCCESS in the status line.
Users may select the record policy of the system’s internal hard disk drive. By default, the system’s hard
disk drive is set to overwrite from the beginning when it becomes full.
• ON: Overwrite your HDD from the oldest file when the HDD is full.
• OFF: Stop recording after your HDD is full.
• It stops automatically if HDD failure happens. It starts to “Monitoring” again after DVR reboot .
(Press the Enter button to select the Stop or Start and then press the ESC button.)
ITEM ADJUSTMENT
9-5. UPDATE
4
.
Press Down button [
†
] to navigate.
5
.
Press [-, +] buttons to enter appropriate information.
6
.
Press [ENTER] button to save changes and exit menu.
Press [ESC] to exit menu without making changes.
1
.
Press [MENU] button to access the MAIN SETUP menu.
2
.
Select “SYSTEM” menu, by using Directional [
…†œ √
] buttons.
Press [ENTER] button to confirm.
3
.
Select “DISK” on TAP menu by using Left/ Right [
œ √
] buttons.
FORMAT
OVERWRITE
DISK MONITOR
1-2
.
Follow steps 1-2 as shown under “9-4. DISK” on page 38.
3
.
Select “UPDATE” on TAP menu by using Left/ Right [
œ √
] buttons.
4
.
Press Down button [
†
] to navigate.
5
.
Download the latest firmware file and copy to USB Flash memory
stick in the Root Folder.
6
.
Turn on your DVR.