Clover CDR-1610, Руководство пользователя

Страница: 57 / 79

3.9 Network Configuration
▪ Click the “NETWORK CFG” button on the Setup Window, it will show the Network
Configuration Window.
▪ Click the “EXIT” button on the Network Configuration Window, it will return to the Setup
Window.
Figure 3-54: Network Configuration Window
■
IP Mode
▪ There are two types of IP mode, Dynamic IP and Static IP mode.
- DYNAMIC IP : It is automatically received IP address from the Router or Gateway.
With Dynamic IP mode, you do not need to input the Gateway Address,
Subnet Mask, and IP Address Number.
- STATIC IP : Using the Static IP, it needs to Gateway Address, Subnet Mask, and IP
Address Number for network setting.
▪ Click the “IP MODE” button, and select the IP mode by mouse wheel or “UP/DOWN” key
on the front panel and click the button again to confirm.
▪ If you select the “DYNAMIC IP”, it will work after received IP address from the Router
and display on the IP address.
■
Gateway / Subnet Mask/ IP Address
▪ Click the “GATEWAY / SUBNET / IP ADDRESS” button, it will show On Screen
Keyboard.
▪ Enter the address number by using On Screen Keyboard, and then click “OK” button to
set with new address.
▪ Click the “CANCEL” button to return to the origin value.
■
Port Number
▪ Port is the address of TCP and network viewer. It can be set from 1 to 65535 values.
▪ Click the “PORT” button, it will show On Screen Keyboard.
▪ Enter the port number by using On Screen Keyboard, and then click “OK” button to set
with new port number.
▪ Click the “CANCEL” button to return to the origin value.
- 57 -