Clover CDR-1610, Руководство пользователя

Страница: 56 / 79

■
Relay-out On/Off
▪ It enables you to activate relay-out when the sensor is detected.
▪ There are six types of relay-out such as “X (off)”, “1”, “2”, “3”, “4”, “A”.
▪ You can select “ON” or “OFF” by using the mouse wheel or “UP/DOWN” key on the front
panel.
▪ To set the all of relay-out “ON” or “OFF”, click the “A” button.
Figure 3-52: Relay-out On/Off Setting
■
Hold
▪ Hold (Post Record) means that it record a section of video just posterior to sensor
activation.
▪ The holding time is available from 1 to 10 seconds.
Figure 3-53: Sensor Record Hold Time Setting
■ Spot
▪ It enables you to display a full screen when the sensor is detected.
▪ Click the “SPOT” button, and select “ENABLE” or “DISABLE” by mouse wheel or
“UP/DOWN” key on the front panel.
Figure 3-53-1: Motion Spot Display Setting
- 56 -