Cloudray LiteMarker, Руководство пользователя

Страница: 46 / 47

Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd. 41
•
Never touch the optical components with your fingers! Oily or dirty hands may damage
the lens surfaces.
•
Do not use any tools or hard objects to clean the surfaces. Scratches cannot be
repaired.
•
Laser optics are highly sensitive and their surfaces are not as hard as traditional glass.
•
They can also be easily damaged by cleaning. It is therefore necessary to ensure that
any dirt is removed using a suitable suction device and that the surrounding area is cleaned
regularly.
•
Do not use compressed air as it contains small quantities of oil and water.
•
To remove larger pieces of dirt, only use a lens cleaning cloth with high proof (min.
98 %) alcohol.
•
Do not dip the cleaning cloth in the cleaning solution. This contaminates the solution and
makes it unusable. Place drops of the solution on the cloth!
•
Apply the cleaning solution carefully in order to avoid scratching the surface of the lens.
•
Do not wipe the lens with a dry cloth. Do not touch the reverse side of the cloth. Dirt and
sebum on the fingers can be transferred to the lens by the cloth and cause damage.
•
Distribute the cleaning fluid carefully using small circular motions. Start at the centre of
the lens and move outwards to the edge. Keep moving the cloth until the entire surface is
clean.
•
Do not exert any pressure on the lens.
Troubleshooting Guidance
Potential Problems Possible Solutions
No Laser Output
Correct the focus by adjusting the height of the laser arm.
Correct the software parameters if they are invalid or mistaken.
Have a technician fix or establish the connection between the laser
and the mainboard.
Have a technician fix or establish the connection between the laser
and its power supply.
If either the fiber laser source or its power supply have worn out,
have a technician replace them.