Cloudray LiteMarker, Руководство пользователя

Страница: 11 / 47

Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd. 6
2. Safety Information
Disclaimer
Your engraver may differ somewhat from those shown in this manual due to options,
updates, etc. Please contact us if your marking machine came with an outdated manual or if
you have any other questions.
General Safety Instructions
•
Use this laser marking device only in accordance with all applicable local and national
laws and regulations.
•
Use this device only in accordance with this instruction manual and the manual for the
engraving software included with it. Only allow this device to be installed, operated,
maintained, repaired, etc. by others who have also read and understood both manuals.
Ensure that this manual and the software manual are both included with this device if it is
ever given or sold to a third party.
•
DO NOT operate this device continuously for more than 5 hours.
Stop every 5 hours for at least ½ hour.
•
DO NOT leave this device unattended during operation. Observe the
device throughout operation and, if anything seems to be operating
strangely, immediately cut off ALL power to the machine and contact
either our customer service or your dedicated repair service. Similarly,
ensure the device is FULLY turned off in the correct order after each use.
•
DO NOT allow minors, untrained personnel, or personnel suffering
from physical or mental impairment that would affect their ability to follow
this manual and the software manual to install, operate, maintain, or
repair this device.
•
Any untrained personnel who might be near the device while it is in
operation MUST be informed that it is dangerous and fully instructed on
how to avoid injury during its use.
•
Always keep a fire extinguisher, water hose, or other flame retardant
system nearby in case of accidents. Ensure that the local fire
department's phone number is clearly displayed nearby. In the case of a
fire, cut electrical power before dousing the flame. Familiarize yourself
with the correct range for your extinguisher before use. Take care not to
use your extinguisher too close to the flame, as its high pressure can
produce blowback.