CX263 Installation and User Guide v1.1
8
Description of rear panel
1
5
7
12
14
13
8
9
10
10
9
8
10
9
8
11
2
6
3
4
1.
LINE 1 to LINE 6
– six pairs of RCA (phono) sockets for connection of music sources with unbalanced outputs.
Inputs are stereo, summed internally to mono for Zones 2 and 3. See “Music Sources” on page 9.
2.
GAIN 1 to GAIN 6
– gain trims for each line input.
3.
MIC 1 and MIC 2
– two balanced mic inputs. Mic 1 can be used for connection of paging microphones.
See “Paging Access Control” on page 13.
4.
GAIN 1 and GAIN 2
– gain trims for each mic input. See “Gain & level” on page 13.
5.
OUTPUTS 1 to 3
– three balanced Zone outputs: Zone 1 is stereo, Zones 2 & 3 are mono. See “Zone Outputs” on
page 10.
6.
Zone LF/HF
– preset controls for EQ adjustment in each Zone. See “EQ” on page 14.
7.
MIC 1 ACC
– external paging control input for MIC 1. See “Paging Access Control” on page 13.
8.
Z1, Z2 & Z3 REMOTE
– for connection of RL-1 or RSL-6 remote control plates. See “Music Control” on page 10.
9.
FR/REM
– three switches disabling front panel controls for each Zone when remote control is in use.
See “Local/remote control” on page 12.
10.
DIG/AN
– three switches enabling operation of the optional CDI-S200 Serial Interface Card.
11.
SERIAL INTERFACE CARD
– optional CDI-S200 card with 9-pin Dsub connector. A blanking panel is fitted when
the card is not installed.
12.
MUSIC MUTE
– Emergency control input for muting music source. See “Music Mute” on page 11.
13. IEC mains input
14. Mains fuse
