CDI-46 Installation and Setup Guide V1.3
11
To select a different Zone, click
Zones
in the main menu, and then select the required Zone.
Paging Control
Click
Paging
on the main Menu to display the
Paging
page.
•
Paging
– the default red crosses against each of these four indicators change to green ticks when a Zone is selected via
the Digital Paging interface. This applies to either paging, or spot announcements from a PM-SA microphone.
•
PMSA Messages
– clicking on the arrows (>) of these eight buttons sends a command to a Cloud PM-SA Series
paging microphone connected to the Digital Paging Interface to trigger one of its spot announcement groups. Each group
defines a set of zones, a specific chime and a pre-recorded message to be played in those zones. Model PM4-SA has four
programmable spot announcement groups (A to D), while Model PM-8SA has eight (A to H). If the groups have been
renamed (see page 14), their names will be displayed instead of
Group X
.
