CL7202K Multi-functional handheld terminal
User Manual
Shenzhen Clou Electrical Technology Co., Ltd
|
World-class energy solutions provider·RFID Leader
42
DECLARATION OF CONFORMITY
Hereby
，
Shenzhen Clou IOT Technologies Co.,Ltd. declares that this Multifunctional Handheld product in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found an Website: http://www.clouiotech.com/
Testing standards:
EN 60950-1:2006 + A11:2009 + A1:2010+A12:2011+A2:2013
EN 50566:2013/AC:2014
EN 62209-2:2010
EN 62479:2010
ETSI EN 301 489-01 V1.9.2(2011-09)
ETSI EN 301 489-03 V1.6.1(2013-08)
ETSI EN 301 489-07 V1.3.1(2005-11)
ETSI EN 301 489-17 V2.2.1 (2012-09)
ETSI EN 301 489-24 V1.5.1(2010-10)
ETSI EN 300 328 V1.9.1 (2015-02)
EN 302 208-1 V2.1.1: 2015-02
EN 302 208-2 V2.1.1: 2015-02
ETSI EN 301 511 V9.0.2 (2003-03)
EN 302 208-1 V2.1.1: 2015-02
EN 302 208-2 V2.1.1: 2015-02
ETSI EN 301 908-1 V6.2.1 (2013-04)
ETSI EN 301 908-2 V6.2.1 (2013-10)
Manufacture's Name:
Shenzhen Clou IOT Technologies Co.,Ltd.
Model number:
CL7202K
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a
minimum separation distance of 1cm must be maintained between the user’s body and the handset, including
the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This Tablet pc product(Contains the auxiliary equipment:Adapter) in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. All essential radio test suites have been
carried out.
1. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO
2. The product shall only be connected to a USB interface of version USB 2.0
3.
Adapter shall be installed near the equipment and shall be easily accessible.
4.
The plug considered as disconnect device of adapter
5.
The device complies with RF specifications when the device used at 0mm form your body
