STEP 7 - Measure, Cut, and Install
Closet Rods
STEP 9 - Install Shelf Trim
STEP 8 - Install Support Angle Brackets
For shelf with closet rod applications, cut the closet rod the
same length as the front of the shelf or as measured from pole
cup to pole cup. Secure the closet rod to the pole cups with
self-tapping screws.
Secure the shelf trim with #6 x 5/8 in. wood screws to the shelf
at each wall-supported end.
Install the angle support brackets. Space and mount angled
brackets equidistant from each supported end of the shelf but
not more than 32 in. apart. Attach by sliding the angle support
brackets underneath the front lip of the ventilated wood shelf
until the shelf is level and the bracket is flat against the shelf and
wall. Pre-drill as required in drilling procedure. Attach bracket
to shelf and secure with appropriate fasteners.
STEP 6 - Attach Shelf to Hardware
Attach the ventilated wood shelf to the sidewall brackets by
pre-drilling and screwing the ventilated wood shelf to the middle
shelf slats in the locations provided on the sidewall brackets.
Pre-drill as required in drilling procedure, and attach the shelf to
the backwall channel with #6 x 5/8 in. wood screws to secure
as required above.
Completed Wall-to-Wall shelf installation.
3
