Clockaudio CDT100 MK3, Руководство пользователя

Страница: 39 / 46

3 9
1.3.16 Set RGB State
The Set RGB State command provides for setting the brightness of the Red, Green and Blue
LEDs in the TS(s).
The following command sets the LEDs channel 1 to full on.
SRGB 1 255 255 255<CR>
Response:
ACK SRGB 1 255 255 255<CR>
1.3.17 Get RGB State
The Get RGB State command provides for setting the brightness of the Red, Green and Blue
LEDs in the TS(s).
The following command returns the RGB level of all four TS ports:
GRGB 0<CR>
Response:
ACK GRGB 0 CH1 200 167 167 CH2 67 95 100
CH3 40 50 100 CH4 100 100 100<CR>
1.3.18 Set Global Brightness Control
The Set Global Brightness Control command provides for setting the global brightness
control for each individual color. This same setting applies to all of the channels. It is used
to permit control of the brightness for the color type of the LED. Each color can be set to a
value between 0 (off) and 127 (max brightness)
The following command sets the Global Brightness Control
SGBC 127 127 127<CR>
Response:
ACK SGBC 127 127 127<CR>