Clockaudio CDT100 MK3, Руководство пользователя

Страница: 13 / 46

1 3
CONNECT ARM-C CONTROLLER
The ARM-C port connects to an optional ARM-C controller for use with boundary
mics that have motorized retraction features.
Connect the ARM-C device to the port labels ARM-C with a standard RJ12 cable.
Use Clockaudio Control Panel application to test ARM-C functionality.
CONNECT TO A DANTE NETWORK
Each Dante network port provides up to four channels of input to a Dante
network, and two channels of audio output from a Dante network on a single
network cable.
When using a single CDT100 MK3 (or when connecting multiple CDT100
MK3 units directly to a switch in a non-daisy chain configuration), connect one of
the CDT100 MK3 Dante Ports directly to an open port on a Dante network switch.
The second Dante Port is used for Daisy Channing CDT100 MK3 networked
audio (see Daisy Chaining configuration for details).
NETWORK CABLE RECOMENDATIONS
Shielded CAT5e or CAT6 cables are recommended for Dante Network
connections. Shielded connections will minimize interference from
lighting and other sources.