M01W
45H
6-0
6
WSAT-SC
75C-180F
- R E S I D U AL R I S K S -
9
MOVING PARTS
- Contact with the fan rotors can cause injury. Before removing the protective grilles or the fans themselves, make certain
the isolating switch on the power line to the unit is set to the OFF position and padlocked, and post a warning sign.
- Contact with the fan rotors can cause injury. Before removing the protective grilles or the fans themselves, make certain
the isolating switch on the power line to the unit is set to the OFF position and padlocked, and post a warning sign.
REFRIGERANTS
- In the event of safety valves coming into operation and releasing refrigerant gas, persons in the vicinity can be injured
or suffer toxic effects. Always wear suitable clothing and protective goggles when working in potential hazard areas. In
the event of refrigerant gas escaping, refer to the “Safety datasheet” for the particular refrigerant.
- If an open flame or heat source is brought into contact with the refrigerant, or the pressurized gas circuit should
overheat (e.g. during welding operations), this can cause explosion or fire. Do not position any heat source within the
hazard area. Maintenance or repair operations involving welding must be carried out with the system emptied of
refrigerant.
WATER SYSTEM
- Defects affecting pipelines, connections or valves and other control components can result in water being leaked or
sprayed from the system, occasioning damage to property or causing short circuits in the unit. Make certain all hydraulic
connections are securely made, following the directions given in the present manual.
REFRIGERANT SAFETY CHARTS
R-407C
01 Identifying
elements
for the substance
Product name
: forane 407C
N°SDS 01965/1
Supplier: ELF ATOCHEM ITALIA
Via G.Murat 17, 20159 Milano tel. 02/668111
02 Information
concerning
composition of
components
Chemical nature of the compound
Mixture based on:
•
Forane 32(difluoromethane) (N° CAS: 75-10-5)
•
Forane 125 (pentafluoroethane) (N° CAS: 354-33-6)
•
Forane 134a (1.1.1.2 tetrafluoroethane) (N° CAS: 811-97-2)
03 Identification of risk
Greatest physical and chemical dangers
:
Thermal decomposition in toxic and corrosive products
04 First-aid
measures
General information
:
Inhalation
: Carry the victim into the open air. Resort to oxygen or artificial respiration if necessary.
Contact with skin
: Frostbite must be treated in the same way as burns.
Contact with the eyes
: Immediate rinsing in abundant water. If irritation should continue, consult an ophthalmologist.
Medical instructions
: Do not administer catecholamines
(due to the cardiac sensitisation caused by the product)
05 Fire
prevention
measures
Specific dangers
: Thermal decomposition into toxic and corrosive products. Hydrofluoric acid. Carbon monoxides.
Specific means of intervention
: Cool containers/cisterns with jets of water. Prevent any sparks or flames.
Do NOT smoke.
Special protection systems for fire-fighting squads
: Carry breathing apparatus and wear protective clothing.
06 Measures to take in
case of accidental
spillage
Individual precautions
: Avoid contact with the skin, eyes and inhalation of vapours. Use personal protection devices.
In an enclosed space: ventilate or use breathing apparatus (risk of suffocation). NO SMOKING ALLOWED
Precautions for environmental protection
: Minimise the amount of waste deposited in the environment.
07 Manipulation
and
storage
Technical measures/precautions
.
Form of storage and manipulation applicable to the products: PRESSURIZED GAS.
Ensure adequate ventilation and evacuation for the level of equipment.
Advice for use
: Prevent sparks and contact with hot surfaces. DO NOT SMOKE.
Technical measures/Storage procedures
: Store at room temperature in the original container. Keep away from flames, hot
surfaces and sparks. Store in a cool, well-ventilated place. Protect full containers from sources of heat to avoid excessive
pressures.
Recommended
: Ordinary steel.
Avoid
: Alloy containing more than 2% magnesium.
Plastics.
Содержание WSAT-SC 100D Series
Страница 2: ......