manualshive.com logo in svg

CLIVET WSAN-XSC3 100.4, Инструкция по установке и эксплуатации

Поделиться
Скачать
CLIVET WSAN-XSC3 100.4 Скачать руководство пользователя страница 43

WSAN-XSC3 90.4-240.4 

43

8.14  Copeland scroll compressor

Compressor may stop Pumping With Motor Running

Turn Off And Wait Until Cool

May need More Than 1 Hour To Reset

Advanced Scroll Temperature Protection

8.15  System discharge

1.   evacuate the system
2.   evacuate the exchanger, use all the present taps
3.   use compressed air to blow the exchanger
4.   dry completely the exchanger by an hot air jet; for greater safety fill the exchanger with glycoled solution
5.   protect the exchanger from the air
6.   remove the drain plugs to the pumps

Any anti-freeze liquid contained in the system should not be discharged freely as it is a pollutant.
It must be collected and reused.
Before starting a washing the plant.

Example

•

 emptying pump

B

It’s recommended that the re-start after the stopping period is performed by a qualified technician, especially after seasonal stops or seasonal 

switching.
When restarting, refer to what is indicated in the “start-up” section.
Schedule technical assistance in advance to avoid hitches and to guarantee that the system can be used when required.

8.16  Pump replacement

Содержание WSAN-XSC3 100.4

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды