manualshive.com logo in svg

CLIVET WSAN-XSC3 100.4, Инструкция по установке и эксплуатации

Поделиться
Скачать
CLIVET WSAN-XSC3 100.4 Скачать руководство пользователя страница 12

12 

WSAN-XSC3 90.4-240.4 

4.10  Operation sequence

Close all vent valves in the high points of the unit hydraulic circuit
Close all drain valves in the low points of the unit hydraulic circuit:

•

 Heat exchangers

•

 Pumps

•

 collectors

•

 storage tank

•

 free-cooling coil

1.   Carefully wash the system with clean water: fill and drain the system several times.
2.   Apply additives to prevent corrosion, fouling, formation of mud and algae.
3.   Fill the plant
4.   Execute leakage test.
5.   Isolate the pipes to avoid heat dispersions and formation of condensate.
6.   Leave various point of service free (wells, vent-holes etc).

Neglecting the washing will lead to several filter cleaning interventions and at worst cases can cause damages to the exchangers and the 

other parts.

4.11  hydronic assembly

For details see:
9 Accessories p. 46

Содержание WSAN-XSC3 100.4

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды