CLIVET ELFOFresh EVO CPAN-YIN, Руководство по установке, использованию и обслуживанию

Страница: 19 / 76

19
3 - POSITIONING
1,5 m
OK
AMBIENT KEYBOARD
The choice of the installation point is decisive for the
environmental comfort and the energy consumption.
The thermostat must be placed :
•
In a room with medium temperature and humidity
conditions, representative of the other rooms
•
at a height of
150 cm
• preferably on an internal wall
Positions to avoid :
•
next to heat sources
• points exposed to direct sunlight
•
in a position with air rejected from outlets or
diffusers
•
behind curtains or pieces of furniture
•
near windows and doors to the outside
• on walls crossed by fireplaces or heating ducts
•
on external walls.
Use straight head screwdriver to insert into the buc-
kling position in the bottom of keyboard, and spin the
screwdriver to take down the back cover. (Pay atten-
tion to spinning direction, otherwise will damage the
back cover!)
Use three GB950-86 M4X20 screws to directly install
the back cover on the wall.
Use two M4X25 GB823-88screws to install the back
cover on the 86 electrician box, and use one GB950-
86 M4X20 screws for fixing on the wall.
Adjust the length of two plastic screw bars in the ac-
cessory to be standard length from the electrical box
screw bar to the wall. Make sure when install the screw
bar to the wall, make it as flat as the wall.
Use cross head screws to fix the keyboard bottom co-
ver in the wall through the screw bar. Make sure the
keyboard bottom cover is on the same level after in-
stallation, and then install the keyboard back to the
bottom cover.
Over fasten the screw will lead to deforma tion of back
cover.