22
III. MAINTENANCE
B. Motor
The motors are specially designed for masonry sawing. It is totally enclosed and the
sealed bearings require no lubrication. The motor is equipped with thermal overload
protection.
1. Periodically clean the dirt and sludge build-up from the motor fan housing and
cooling fins.
2. If the motor becomes overheated, the protector shuts the motor off. Turn the motor
switch to the "OFF" and identify the cause of overheating.
For any Electric Motor service, warranty, or technical related questions please contact your
nearest Baldor service center:
Baldor Electric Company
Corporate Headquarters
5711 R.S. Boreham, Jr. St.
P.O. Box 2400
Fort Smith, AR 72901
Phone: (501) 646-4711
Fax: (501) 648-5792
Web Page:
http://www.baldor.com/support/default.asp
C. Engine
1. Refer to the engine owner’s manual for complete maintenance.
a. Pre-cleaner: every 25 operating hours, more often in dusty or dirty
conditions, wash and oil the pre-cleaner.
b. Paper Element: Every 100 operating hours, more often under dusty or dirty
conditions clean the paper element.
c. Engine Oil: After the first month or 20 operating hours, change the oil, then
every 6 months or 100 operating hours.
For any Engine service, warranty, or technical related questions please contact your nearest
Honda service centers:
Honda Power Equipment Group
4900 Marconi Dr.
Alpharetta, GA 30005-8847
Tel: (800) 426-7701 | Fax: (678) 339-2670
Web page:
http://www.honda-engines.com/dis.htm
D. Blade Shaft Bearings
The blade shaft bearings are lubricated and should not require daily lubrication
under normal conditions. However, to assure long life the bearings do need to be
lubricated periodically. The time interval between greasing is dependent on the running
speed and operating conditions. The following chart covers most situations and can be
used as a guide.
TEMPERATURE
CLEANLINESS
GREASING INTERVAL
*UP TO 150 F
Dirty
6 to 12 months
Over 150 F
Dirty
Daily to 2 Weeks
Any Temp
Very Dirty
Daily to 2 Weeks
Any Temp
Extreme Conditions
Daily to 2 Weeks
Содержание BBC157
